Please let me know if you have any questions or suggestions on how to improve these instructions - either leave a comment inline below(need to be logged into Dropbox to do so, I believe) or else email me directly at scottbez1 at gmail.com.
Building a split-flap display? I would love to hear from you and see photos/videos of your project in progress or completed! This project has been a hobby of mine for a few years and the coolest part by far is hearing from other people making their own and seeing them in action. Feel free to shoot me an email at scottbez1 at gmail.com 🙂 or, join the Discord server to share and discuss with the wider split-flap community!
Plastic wrap and glass storage container(For applying letter stickers)
[if hand-cutting flaps] Badge slot punch
2. Sensor PCB Assembly
💡New(not shown in video!): The laser cut files include a jig for spacing the hall effect sensor accurately without having to measure the 5.8mm gap. See photos of it below.
The latest PCB design also has holes that are spaced further apart for the sensor to make soldering them easier. You’ll need to bend the sensor’s pins outward to fit into the holes.
The rough steps are:
solder 90-degree pin headers *from the top side*(0:21)
bend leads on hall effect sensor 90 degrees(2:00)
insert hall effect sensor from the back side of the PCB(opposite the pin headers)(2:45)
adjust hall effect sensor so there's a ~5.8mm gap between the back of the sensor and the PCB(3:00)
If your laser cut parts came in a full sheet as-cut(e.g. Ponoko does this, but not Elecrow), you’ll find the jig inside the motor cutout, highlighted in red above.
3. Mechanical Assembly
Note: if using acrylic rather than MDF/wood, do not force parts together if they don’t quite fit. Acrylic is extremely brittle and will crack. Use a small file if necessary to remove any excess material. While the design attempts to achieve a tight fit, different laser-cutters may remove more or less material, so undersized holes/slots can occur.
Intro
1. Gather the parts
2. Sensor PCB Assembly
3. Mechanical Assembly